Design and Evaluation of an ESP32-Based Automatic Cake Ingredient Dosing System Using Load Cell Control
DOI:
https://doi.org/10.61255/decoding.v4i3.1559Keywords:
Automatic dosing, Auger screw feeder, ESP32, Load cell, Peristaltic pumpAbstract
Purpose – This study designs and evaluates an ESP32-based automatic ingredient dosing system for a small bakery experiencing imprecise manual weighing.
Methods - A research and development approach produced two prototypes: an auger-based rice flour doser and a peristaltic-pump coconut milk doser. Both used load cells, HX711 modules, and single-speed on/off control with a 400 ms settling step. Manual and automatic dosing were compared over ten reported repetitions per condition using targets of 263 g flour and 492 mL coconut milk, the latter treated as 492 g under an assumed density of 1.0 g/mL.
Findings - Reported accuracy increased from 91.5% to 97.9% for flour and from 95.2% to 98.9% for coconut milk. Mean absolute errors decreased to 5.4 and 5.3 g, respectively. Automatic dosing averaged 24.9 s for flour and 19.7 s for coconut milk. All nine functional test items were completed successfully.
Research implications – The findings concern one recipe, enterprise, operator, and testing session. Manual and automatic timing covered different task boundaries, and calibration ended at 453 g, below the coconut milk target. Further calibration, equivalent timing comparisons, and longer-term testing are needed before generalizing performance.
Originality - The prototype combines solid and liquid dosing mechanisms within a shared load-cell feedback framework intended for small-scale bakery production.
Abstract views: 50
,
PDF downloads: 48
Downloads
References
Kementerian Koordinator Bidang Perekonomian Republik Indonesia, "UMKM menjadi pilar penting dalam perekonomian Indonesia," Siaran Pers HM.4.6/189/SET.M.EKON.2.3/05/2021, Jakarta, 2021. [Online]. Available: https://ekon.go.id.
A. D. Cahyanto, I. Sunaryantiningsih, and B. Fandidarma, "Prototype Smarter Chicken Feeding untuk Penakaran Campuran Pakan Ayam Otomatis Berbasis Load Cell," SinarFe7, vol. 7, no. 1, pp. 58–65, 2025.
L. T. Y. Tampubolon, I. Gunawan, Z. M. Nasution, S. Sumarno, and H. S. Tambunan, "Rancang Bangun Alat Pemantau Infus Menggunakan Modul RF 433 MHz dan Sensor Load Cell Berbasis Arduino Uno," Jurnal Penelitian Inovatif, vol. 1, no. 2, pp. 107–118, Nov. 2021, doi: 10.54082/jupin.16.
M. Avci and M. Ozdemir, "Design and Implementation of a High-Precision Load Cell Measurement System Using HX711," Measurement, vol. 178, pp. 109360, 2021.
M. Galina, "Design and Implementation of Home Industrial-Based Automatic Granulated Food Weighing Machine," JURNAL INFOTEL, vol. 16, no. 3, pp. 660-677, 2024, doi: 10.20895/infotel.v16i3.1168.
X. Xu, C. Shen, F. Li, L. Wang, and Y. Li, "Design and Experimental Study of Equal-Area Variable-Pitch Screw Structure for Wheat Flour," INMATEH Agricultural Engineering, vol. 64, no. 2, pp. 423-436, 2021, doi: 10.35633/inmateh-64-42.
A. T. Alamsyah, A. Pracoyo, and H. K. Safitri, "Implementasi Pengendalian Mesin Auger dan Tractor pada Silo Berbasis Arus," Metrotech (Journal of Mechanical and Electrical Technology), vol. 3, no. 1, pp. 9–15. 2024, doi: 10.33379/metrotech.v3i1.3472.
A. N. Nasution, A. Asri, R. Rosdiana, and F. Nisa, "Perancangan Alat Penimbang Kacang Tanah Otomatis Menggunakan Sensor Berat (Load Cell Single Point)," Jurnal Energi Elektrik, vol. 11, no. 2, 2022, doi: 10.29103/jee.v11i2.10704.
I. R. Valendi and Risfendra, "Microcontroller-based Automatic Granule Weighing Device with Human Machine Interface (HMI) Integration," Journal of Industrial Automation and Electrical Engineering, vol. 2, no. 2, pp. 227-235, 2025, doi: 10.24036/jiaee.v2.i2.pp227-235.
F. Muhammad, I. Lutfi, and A. Rahman, "IoT-Enabled Automatic Sugar Filling Device with Weight-Based Control," Journal of Artificial Intelligence and Engineering Applications (JAIEA), vol. 5, no. 1, pp. 24-27, 2025, doi: 10.59934/jaiea.v5i1.1222.
M. F. Naqi and M. Jannah, "Sistem PID untuk Pengaturan Aliran Air pada Dua Tangki Penampungan," ELECTRON Jurnal Ilmiah Teknik Elektro, vol. 6, no. 1, pp. 9-25, 2025, doi: 10.33019/electron.v6i1.243.
C. L. Kok, C. K. Ho, Y. Dai, T. K. Lee, Y. Y. Koh, and J. P. Chai, "A Novel and Self-Calibrating Weighing Sensor with Intelligent Peristaltic Pump Control for Real-Time Closed-Loop Infusion Monitoring in IoT-Enabled Sustainable Medical Devices," Electronics, vol. 13, no. 9, 2024, doi: 10.3390/electronics13091724.
P. S. Wahyu, F. I. Abdi, D. Wulandari, and A. M. Sakti, " Perancangan Sistem Kendali Pada Alat Liquid Handling System (LHS) 3-Axis Modifikasi Mesin 3D Printing Fused Deposition Modeling (FDM)," Jurnal Rekayasa Mesin, vol. 9, no. 03, pp. 404–410, 2024, doi: 10.26740/jrm.v9i03.65792.
Sugiyono, Metode Penelitian dan Pengembangan (Research and Development/R&D), 4th ed. Bandung: Alfabeta, 2019.
J. W. Creswell dan V. L. P. Clark, Designing and Conducting Mixed Methods Research, 3rd ed. Thousand Oaks: SAGE Publications, 2017.
F. Forouzandeh, M. K. Y. Chan, and M. B. Shamsi, "A Review of Peristaltic Micropumps," Micromachines, vol. 13, no. 3, pp. 419, 2022, doi: 10.1016/j.sna.2021.112602.
M. Hostettler et al., "Modelling of Peristaltic Pumps with Respect to Viscoelastic Tube Material Properties and Fatigue Effects," Fluids, vol. 8, no. 9, pp. 254, 2023. doi: 10.3390/fluids8090254.
M. O. Besenhard, S. K. Karkala, E. Faulhammer, S. Fathollahi, R. Ramachandran, and J. G. Khinast, "Continuous Feeding of Low-Dose APIs via Periodic Micro Dosing," Int. J. Pharm., vol. 509, no. 1-2, pp. 123-134, 2016, doi : 10.1016/j.ijpharm.2016.05.033.
D. Privitera et al., "Extensive Dataset for Peristaltic Pump Accuracy Assessment in Pharmaceutical Manufacturing," Sci. Data, vol. 12, 2025, doi: 10.1038/s41597-025-05902-z.
JCGM, Evaluation of Measurement Data - Guide to the Expression of Uncertainty in Measurement, JCGM 100:2008. Sevres: Joint Committee for Guides in Metrology, 2008.
M. Buchhorn, G. D. Akkoc, and D. Dworschak, "An Open-Source Peristaltic Pump with Multiple Independent Channels for Laboratory Automation," Digit. Discov., vol. 4, pp. 2864-2876, 2025, doi: 10.1039/d5dd00157a.
K. Rizki, How Digitalization Is Accelerating the Growth of MSMEs in Indonesia. Geneva: World Economic Forum, 2022.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Taskia Aulia Afni, Endi Sailul Haq, Alfin Hidayat

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
